How To Remove Logo From Side Of Sunglasses: A Basic Guide

Sunglasses are an accessory that many people use to help protect their eyes from the sun. They also come in handy for blocking wind and other elements. Some sunglasses have a logo on the side of them, which can be distracting when you're trying to block out everything else around you.

If you're looking for a quick and easy way on how to remove the logo from the side of sunglasses, keep reading this article to find the right method. Let’s scroll down!

What Are The Methods On How To Remove Logos From The Side Of Sunglasses?

Use An Emery Board Or A Nail File

​​If you want to take out the logo from your eyeglasses frames, first cover up any exposed lenses with a small towel and wrap it all around them for extra protection. Then open up either side of the frame temples or arm for easier access.

Subsequently, use an emery board or nail file to sand the logo from its frame. Start by placing the edge on what you want to be removed. And then begin filing in small movements back-and-forth across it with wonderful grit sandpaper until there is nothing left but smooth surface texture underneath.

Dust off any excess particles that may have been collected onto a towel for safekeeping before repeating this process if necessary on both temples of your glasses.

Use Alcoholic Solvents

Some various chemicals and solvents can assist you in removing the logo from your eyeglasses frames. You should follow these steps carefully, though, as not all of them will work for every person.

Before cleaning your frames, you first need to visit a store and buy some chemicals or solvents. Be assured they are qualified for use on glasses, so that way there will be no negative effects on them.

The next step is using a liquid cleaning solution before applying any logo removal products. Then, remove the label with a soft cloth or other tools to prevent scratching delicate surfaces of your frame's lenses. 

If you want to experiment with a different technique, try lightly rubbing alcohol. It will remove any logo material but not damage metal and enamel underneath it in most cases. 

Acetone may leave black marks on the plastic. Still, it is worth trying once. If you're afraid of it ruining your sunglasses, try on small areas first. 

Use A Sugar Cube

A cane sugar cube is a perfect tool for those who want their logo removed from delicate surfaces. The softness of the enamel will not withstand pressure, which means you'll need something harder like coarse sandpaper or steel wool and polishing compound - both found at most grocery stores.

Use A Penny Edge 

There are many different ways to remove logos from sunglasses, but the penny edge method is one of the best choices. It takes less than 5 seconds and doesn't scratch anything up at all. There is no need for expensive new eyewear when you can use something already in your home or office.

Use MR. Clean Magic Eraser

A few tricks you can use to get rid of logos on your lenses include a wet paper towel in warm soapy water and letting it sit for 10 minutes, then rubbing with Magic Eraser. However, ensure to rub fast and hard because only seconds are needed.

Cover With A Sharpie

Otherwise, you can attempt to cover them with something like a sharpie pen.

How To Remove Logos From The Side Of Sunglasses In Sticker Forms?

It's no secret that sunglasses can get pretty sweaty under pressure. When you're on your feet all day in the sun, it makes sense why some vendors would want to capture a piece of what they sell- by placing stickers onto customers' lenses. 

The adhesive for these tags often leaves behind residue, which is difficult to remove without an extra helping hand from home cleaning products - but don't fret because we've found one such solution that might do wonders for removing pesky price tag goo.

Step 1: Soak a soft cloth in acetone nail polish remover for a few minutes.

Step 2: Saturate the sticker with the nail varnish remover by dabbing the towel over it. Then wait a minute for the sticker to absorb the nail paint remover.

Step 3: Peel the sticker off with your nails. The nail polish remover will dissolve the glue and allow you to peel it away easily, like magic.

Step 4: After you're finished cleaning, use a cloth soaked in nail polish remover to get rid of any remaining residue.

Final Thoughts

It cannot be easy to find the right pair of sunglasses that are not too expensive but do not have logos. Removing the logo from the side of the glasses is possible, and there are a few different methods you could use depending on what type of material your sunglasses are made out of.

We hope this article has helped you find out about methods to remove logos from the side of sunglasses.